capebrewer
New Member
30 amp The Electric Brewery Control Panel built exactly as Kal's.
$1500 plus shipping or free pick-up (located in Mass)
Auber PID's
Control box bought pre-cut from Auber so cuts are clean and square
Substituted the EZBoil PID in the Boil so temperature/power can be conveniently adjusted with the knob
Probes are Auber and not DIY $150+ value and never used or mounted to system or kettles.
I built this controller about 5 years ago and never set-up a 3 vessel system. It has been stored indoors in a climate controlled house
It has been tested and as shown in the photo's the probes and volt/amp meters work
New kit from The Electric Brewery is $1595 without the probes; New built unit is $2295 w/o probes
Not including the power cord shown in pictures as I may need this for a future build.
$1500 plus shipping or free pick-up (located in Mass)
Auber PID's
Control box bought pre-cut from Auber so cuts are clean and square
Substituted the EZBoil PID in the Boil so temperature/power can be conveniently adjusted with the knob
Probes are Auber and not DIY $150+ value and never used or mounted to system or kettles.
I built this controller about 5 years ago and never set-up a 3 vessel system. It has been stored indoors in a climate controlled house
It has been tested and as shown in the photo's the probes and volt/amp meters work
New kit from The Electric Brewery is $1595 without the probes; New built unit is $2295 w/o probes
Not including the power cord shown in pictures as I may need this for a future build.
Last edited: