redrocker652002
Well-Known Member
OK, having read Palmers chapter regarding sanitizing I am left a bit confused. I have two gallon jugs with used StarSan in them that I was going to throw out. But, after reading his chapters he said that as long as it is not cloudy it is still good to go. This stuff is clear as can be, so I am guessing it is still ok? Not that it is difficult to mix up more, but heck if I can keep using it, why not.
Also, he states that contact time is simply 30 seconds on what you want to sanitise, so my thought is, why not just spray my buckets with it instead of filling 2 to 3 gallons of water and doing it that way? I am in the San Francisco area, so water is a huge issue here. If I were in Oregon or Idaho I would be less concerned.
Any input is welcomed as I am still trying to get the best practice and keep the water usage to a minimum
Also, he states that contact time is simply 30 seconds on what you want to sanitise, so my thought is, why not just spray my buckets with it instead of filling 2 to 3 gallons of water and doing it that way? I am in the San Francisco area, so water is a huge issue here. If I were in Oregon or Idaho I would be less concerned.
Any input is welcomed as I am still trying to get the best practice and keep the water usage to a minimum