Okay so I contacted my city and got a water report but I can’t get the numbers to ad up in Brewfather what am I missing?
Here is what my city said
We sampled in the Tumwater distribution system area in 2021
pH = 7.4
Calcium = 13.8 mg/L
Alkalinity = 55.4 mg CaCO3/L
The rest of the results are from samples taken at our sources and treatment plants and therefore only available in ranges.
Sulfate = 3.2-9 mg/L
Chloride = 2.6-5.3 mg/L
Sodium = 5-7.18 mg/L
Hardness = 41.7-69.7 mg/L
When I input in Brewfather my hardness and alkalinity numbers don’t match what they should be and those can’t just be input. They didn’t send me the bicarbonate level but if even if I mess around with that number I can get alkalinity to make sense but not hardness.
Here is what my city said
We sampled in the Tumwater distribution system area in 2021
pH = 7.4
Calcium = 13.8 mg/L
Alkalinity = 55.4 mg CaCO3/L
The rest of the results are from samples taken at our sources and treatment plants and therefore only available in ranges.
Sulfate = 3.2-9 mg/L
Chloride = 2.6-5.3 mg/L
Sodium = 5-7.18 mg/L
Hardness = 41.7-69.7 mg/L
When I input in Brewfather my hardness and alkalinity numbers don’t match what they should be and those can’t just be input. They didn’t send me the bicarbonate level but if even if I mess around with that number I can get alkalinity to make sense but not hardness.