I know this discussion has been had a few times, with most occurring in 2021 or earlier with the gen three Brewzilla. There is also this thread that hasn’t seemingly come to resolution so i’m starting a new thread in hopes of getting feedback from anyone who has one or both of the generation 4 BrewZilla or the anvil foundry. I had, for quite a while, been strongly considering the anvil, because of the optional 110 to 220 V conversion and the double wall insulation, but I am starting to reconsider. I can support 220 V so their switching factor is less of a consideration for me.It seems the BrewZilla has a larger grain capacity which opens up the possibility of brewing bigger, beers and seemingly supports timed step mashing in a way that the anvil does not. I have read elsewhere that some folks like the external pump option on the anvil so that they can buy one that is a little bit higher quality but I’ve also seen that a lot of the stuck mash issues from earlier generation BrewZilla have largely been resolved. More beer has a good sale on both for black Friday that ends tonight, so trying to collect a few more data points to sway my decision one way or the other. Feedback is Appreciated!