heckofagator
Well-Known Member
I just picked up a new Anvil Foundry 10.5 with a 6-15p 240v plug. I was planning to use my existing 14-50 outlet (that my PHEV charger is plugged into) with one of these
https://www.amazon.com/gp/product/B07HX9JCC4/ref=ox_sc_saved_image_1?smid=A1UO2GJ291VXKR&psc=1
however, I'm getting conflicting advice on that so I may just go have another circuit run for the Foundry. I have a subpanel in the garage with empty slots so it would be easy and cheap, I suppose, to add a new outlet.
I dont have any welders or compressors and don't necessarily plan to. What's the most common/useful receptacle that I could add that will work with the Foundry as well as other 240v items in the future?
something like this?
https://www.homedepot.com/p/Leviton...T5Cufa7uKdIGnUq1ea4aAieUEALw_wcB&gclsrc=aw.ds
https://www.amazon.com/gp/product/B07HX9JCC4/ref=ox_sc_saved_image_1?smid=A1UO2GJ291VXKR&psc=1
however, I'm getting conflicting advice on that so I may just go have another circuit run for the Foundry. I have a subpanel in the garage with empty slots so it would be easy and cheap, I suppose, to add a new outlet.
I dont have any welders or compressors and don't necessarily plan to. What's the most common/useful receptacle that I could add that will work with the Foundry as well as other 240v items in the future?
something like this?
https://www.homedepot.com/p/Leviton...T5Cufa7uKdIGnUq1ea4aAieUEALw_wcB&gclsrc=aw.ds