Hi All,
Just purchased a Spike 10gal Unitank and will be fermenting and carbing my beers in it. I haad a few questions on how to do this. Going to pick an extreme example because I will be brewing a belgian dark quad soon.
I am wanting to aim for 3.1 volume of CO2. The spike unitank supports max 15psi so my thoughts are:
1. Cold Crash to 33F
2. Increase pressure of co2 regulator to ~19 in order to get a tank pressure of 14, using EQU chart.
QUESTION: Do I leave the Co2 tank open at the equilibrium pressure?
3. Pressure transfer by setting keg to ~12 PSI and leaving tank at 14psi
4. Serving temp for the Belgian quad is ~45F, but I still want 3.1 volumes, set my kegerator to 45F
QUESTION: Using equi chart, I now want my keg to be set to 25PSI, is that accurate?
I have flow control so this shouldn't be an issue.. maybe.
Thanks!
Just purchased a Spike 10gal Unitank and will be fermenting and carbing my beers in it. I haad a few questions on how to do this. Going to pick an extreme example because I will be brewing a belgian dark quad soon.
I am wanting to aim for 3.1 volume of CO2. The spike unitank supports max 15psi so my thoughts are:
1. Cold Crash to 33F
2. Increase pressure of co2 regulator to ~19 in order to get a tank pressure of 14, using EQU chart.
QUESTION: Do I leave the Co2 tank open at the equilibrium pressure?
3. Pressure transfer by setting keg to ~12 PSI and leaving tank at 14psi
4. Serving temp for the Belgian quad is ~45F, but I still want 3.1 volumes, set my kegerator to 45F
QUESTION: Using equi chart, I now want my keg to be set to 25PSI, is that accurate?
I have flow control so this shouldn't be an issue.. maybe.
Thanks!