Joe_CraftBeerTraders
Well-Known Member
I did a few searches on here for CIPs and while there is information about building one and what type of pumps were bought, they were all a little dated (pre 2017). So I figured I would make a video of what our CIP setup looks like on our 14gal Unitank.
Parts:
Ssbrewtech Mini CIP with 3" TC
Cam locks
T with 1/2" barbs
Standard home brew pump
First we run hot water through the CIP and just dump to a bucket to get out majority of the big particles. Then we run 120deg water with PBW in a closed system as seen in the video above for around 20 minutes. For sanitation we still spray down the inside with a spray bottle filled with starsan. We attempted to run starsan through the CIP and will never do that again unless we are planning a foam rave party. I am curious if people are sanitizing with the CIP and what no foam solution you are using.
Parts:
Ssbrewtech Mini CIP with 3" TC
Cam locks
T with 1/2" barbs
Standard home brew pump
First we run hot water through the CIP and just dump to a bucket to get out majority of the big particles. Then we run 120deg water with PBW in a closed system as seen in the video above for around 20 minutes. For sanitation we still spray down the inside with a spray bottle filled with starsan. We attempted to run starsan through the CIP and will never do that again unless we are planning a foam rave party. I am curious if people are sanitizing with the CIP and what no foam solution you are using.