HiImBrian
Well-Known Member
- Joined
- Aug 15, 2014
- Messages
- 273
- Reaction score
- 67
Like many of you have already done, I've now done also. Simple sump pump design with PVC fittings that allow for cleaning the IN and OUT posts as well as a threaded fitting so that I can remove the spray ball for cleaning the fermenter as well.
Notes:
- I purchased a 1/2HP sump pump with a float switch. I would advise against this as a standard bucket doesn't allow the float to operate as it should. I've just zip tied the switch in the ON position.
- Not all PVC needs to be glued together. I left mine so that I could detach the long vertical shaft and fit everything in the bucket.
Notes:
- I purchased a 1/2HP sump pump with a float switch. I would advise against this as a standard bucket doesn't allow the float to operate as it should. I've just zip tied the switch in the ON position.
- Not all PVC needs to be glued together. I left mine so that I could detach the long vertical shaft and fit everything in the bucket.