Logan
Well-Known Member
I'm designing a single-tier brew rig
In addition to general feedback I'm interested in critique on my plumbing. I took inspiration from Blichmann, Black Heart Brewery, and various members on the board. So while I think this is a pretty standard setup I'm curious if I've made any blunders in my design. My overall goal with this system is to seldom disconnect or move anything and clean in place after each brew.
Thanks!
- Dual 5.5KW heating elements
- Dual pump
- Recirculating HLT (for faster strike)
- Auto Sparge MLT
- Counter-flow chiller
- 15 gallon boil, 10 gallon MLT, 10 gallon HLT.
- Camlock hoses (purple)
- 304 Stainless ball-valves, tees & fittings.
In addition to general feedback I'm interested in critique on my plumbing. I took inspiration from Blichmann, Black Heart Brewery, and various members on the board. So while I think this is a pretty standard setup I'm curious if I've made any blunders in my design. My overall goal with this system is to seldom disconnect or move anything and clean in place after each brew.
Thanks!