RPh_Guy
Bringing Sour Back
I'm setting up my (extremely simple) brew stand and I'm thinking the best place to put my RIMS tube is actually attached vertically to my standard 10 gal round cooler mash tun.
I have the 12" tube from BrewHardware, so it has nuts welded onto the tri-clamps. I'm not sure if they're useful at this point.
Has anyone done something similar or have any ideas about what kind of hardware I can use?
I have the 12" tube from BrewHardware, so it has nuts welded onto the tri-clamps. I'm not sure if they're useful at this point.
Has anyone done something similar or have any ideas about what kind of hardware I can use?
Last edited: